Impact test results showed while Inspire 1 propellers sustained damage at the ends after only 2-3 seconds of contact on the asphalt, Voyager 3 carbon propellers merely suffered minor scratch at the ends after 10 seconds.

Voyager 3 propellers are extremely rigid and have sharp edges so precaution is required (especially with young children) during flight. Safety measures must be taken when flying the drone (Inspire 1 has powerful motor and even though it has plastic propellers, they can cause serious injuries, just like Voyager 3).

The GPS module and rear indicator LED board are fitted on the top side of the Voyager 3 cover.

This is the Cirocomm GPS module that goes on to the top side of the aircraft cover. As metal shells can interfere with GPS signal reception and lead to crash accidents, it is recommended not to place any attachments near the GPS module.

Once the top shell is removed, the PCB and core chipset will be revealed. The bluetooth data link module and main controller feature a modular design and the propellar arms are detachable. Compared to all-in-one mainboards, this gives an advantage for service and repair costs when the drone sustains damage.

This is the component that raises and lowers the landing gear and gimbal. The three gears rotate and move the location of the landing gear and camera.

This is the rubber pad that filters vibration from the aircraft. Three rubber domes are used.